sane-genesys - Extension for CanoScan Lide 70

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

sane-genesys - Extension for CanoScan Lide 70

Andreas Nicolai
Hi there,

I'd like to add support for the CanoScan Lide 70 scanner to the genesys
backend, if possible.


Output from lsusb:

Bus 003 Device 004: ID 04a9:2225 Canon, Inc. CanoScan LiDE 70

I extended /etc/sane.d/genesys.conf  to contain:

# Canon LiDE 70
usb 0x04a9 0x2225

and /lib/udev/rules.d/40-libsane.rules to contain:

# Canon CanoScan LiDE 70
ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="2225", ENV{libsane_matched}="yes"


Output from sane-find-scanner:
...
found USB scanner (vendor=0x04a9 [Canon], product=0x2225 [CanoScan]) at
libusb:003:004
...


scanimage -L -v

delivers only an error message.


What can I do to get the scanner supported by one of the backends?

Thanks,
Andreas

PS: I wouldn't mind compiling the genesys backend in debug mode and see what
chipset there is or what error messages appear, but maybe someone has a
quicker solution...



--
sane-devel mailing list: [hidden email]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to [hidden email]
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: sane-genesys - Extension for CanoScan Lide 70

stef-22
On 01/01/2016 12:34, Andreas Nicolai wrote:

> Hi there,
>
> I'd like to add support for the CanoScan Lide 70 scanner to the genesys
> backend, if possible.
>
>
> Output from lsusb:
>
> Bus 003 Device 004: ID 04a9:2225 Canon, Inc. CanoScan LiDE 70
>
> I extended /etc/sane.d/genesys.conf  to contain:
>
> # Canon LiDE 70
> usb 0x04a9 0x2225
>
> and /lib/udev/rules.d/40-libsane.rules to contain:
>
> # Canon CanoScan LiDE 70
> ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="2225", ENV{libsane_matched}="yes"
>
>
> Output from sane-find-scanner:
> ...
> found USB scanner (vendor=0x04a9 [Canon], product=0x2225 [CanoScan]) at
> libusb:003:004
> ...
>
>
> scanimage -L -v
>
> delivers only an error message.
>
>
> What can I do to get the scanner supported by one of the backends?
>
> Thanks,
> Andreas
>
> PS: I wouldn't mind compiling the genesys backend in debug mode and see what
> chipset there is or what error messages appear, but maybe someone has a
> quicker solution...
>
>
>
     Hello,

     the scanner search engine
http://www.sane-project.org/cgi-bin/driver.pl is the first thing to try.

     Its data is based on the sane-backends/doc/desc files where you can
find in unsupported.desc :

:model "CanoScan LiDE 70"
:url "http://www.juergen-ernst.de/info_sane.html"
:interface "USB"
:usbid "0x04a9" "0x2225"
:status :unsupported
:comment "Philips chip. Backend started, see link"


Regards,
     Stef

--
sane-devel mailing list: [hidden email]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to [hidden email]
Loading...