Packard-Bell Diamond 1200 Plus problem

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Packard-Bell Diamond 1200 Plus problem

Jukka-Pekka Kervinen



Hi,

I have same problem with Packard-Bell Diamond 1200 Plus, scanning
whole page with lower resolutions (50 in Color,50-75 with Gray),
but only half-page (X-axis) with higher resolutions. My backend
is 1.0.15, here is the output of sane-find-scanner:


found USB scanner (vendor=0x055f, product=0x021b [USB Scanner], chip=GT-6816) at libusb:001:009



Thanks,

Jukka



Hi,

On Tue, Jun 14, 2005 at 04:05:54PM +0300, Tuukka Pasanen wrote:
> Hi again,
> I tested new gt68xx driver from homepage and it worked (time for new
> sane-backend release?).


> So Packard-Bell Diamond 1200 Plus works fine with gt68xx 1.0-70
> (2005-05-29).

Thanks for your report. Could you please send the output of
sane-find-scanner as there are two scanners with the same name and
they behave differently? Thanks.

Bye,
  Henning



--
sane-devel mailing list: [hidden email]
http://lists.alioth.debian.org/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Packard-Bell Diamond 1200 Plus problem

Henning Meier-Geinitz
Hi,

On Thu, Jun 23, 2005 at 08:20:17PM -0700, Jukka-Pekka Kervinen wrote:
> I have same problem with Packard-Bell Diamond 1200 Plus, scanning
> whole page with lower resolutions (50 in Color,50-75 with Gray),
> but only half-page (X-axis) with higher resolutions. My backend
> is 1.0.15, here is the output of sane-find-scanner:
>
>
> found USB scanner (vendor=0x055f, product=0x021b [USB Scanner], chip=GT-6816) at libusb:001:009

Ok, this is the "new" version of that scanner. Have you also tried the
latest development version of SANE?

Bye,
  Henning

--
sane-devel mailing list: [hidden email]
http://lists.alioth.debian.org/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Packard-Bell Diamond 1200 Plus problem

Jukka-Pekka Kervinen
In reply to this post by Jukka-Pekka Kervinen

Hi,

I downloaded and compiled GT68xx 1.0-70 and now
everything works perfectly (1.1.15 SANE
backend contains GT68xx v. 1.0-66 ?...) ! Still using
stable 1.1.15, not latest development version.
 

Thanks very much !


Best,

Jukka



Message: 6
Date: Fri, 24 Jun 2005 17:30:46 +0200
From: Henning Meier-Geinitz <[hidden email]>
To: [hidden email]
Subject: Re: [sane-devel] Packard-Bell Diamond 1200 Plus problem

Hi,

On Thu, Jun 23, 2005 at 08:20:17PM -0700, Jukka-Pekka Kervinen wrote:
> I have same problem with Packard-Bell Diamond 1200 Plus, scanning
> whole page with lower resolutions (50 in Color,50-75 with Gray),
> but only half-page (X-axis) with higher resolutions. My backend
> is 1.0.15, here is the output of sane-find-scanner:
>
>
> found USB scanner (vendor=0x055f, product=0x021b [USB Scanner],
chip=GT-6816) at libusb:001:009

Ok, this is the "new" version of that scanner. Have you also tried
the
latest development version of SANE?

Bye,
  Henning



--
sane-devel mailing list: [hidden email]
http://lists.alioth.debian.org/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to [hidden email]