Quantcast

CanoScan 9000F not recognized on Lubuntu

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

CanoScan 9000F not recognized on Lubuntu

Jonathan Barés

Hi all,

After googling for hours I still do not understand why my CanoScan 9000F MarkII is not recognized by my Lubuntu computer (14.04 kernel) and am hoping some of you could help with this.

When I run sane-find-scanner I get:

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a kernel driver for your USB host controller and have setup
  # the USB system correctly. See man sane-usb for details.
  # SANE has been built without libusb support. This may be a reason
  # for not detecting USB scanners. Read README for more details.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.

I have tried to add the rule:
# Canon CanoScan 9000F Mark II
ATTR{idVendor}=="04a9", ATTR{idProduct}=="190d", MODE="0664", GROUP="scaner", ENV{libsane_matched}="yes
in /etc/udev/rules.d/50-CanonScan.rules but still get the same problem.

I am really surprised because the scanner seems to be seen by the computer when I run lsusb:
Bus 002 Device 002: ID 04a9:190d Canon, Inc. CanoScan 9000F Mark II
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 1c4f:0048 SiGma Micro
Bus 003 Device 002: ID 413c:2107 Dell Computer Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Here is also my version of sane:
xsane-0.998 (c) 1998-2010 Oliver Rauch
  Courrier électronique : [hidden email]
  paquet xsane-0.996
  compilé avec GTK-2.24.18
  avec fonction de gestion de la couleur
  avec support GIMP, compilé avec GIMP-2.8.4
  Formats de sortie de XSane : jpeg, pdf(compr.), png, pnm, ps(compr.), tiff, txt

If anybody has an idea of what is happening I would be extremelly happy to have some help.
I thank you in advance.
Best,
Jonathan







--
sane-standard mailing list: [hidden email]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-standard
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to  [hidden email]
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: CanoScan 9000F not recognized on Lubuntu

m. allan noah-3
Sorry, this is the wrong mailing list. Please use sane-devel instead.

allan

On Thu, Mar 30, 2017 at 1:17 PM, Jonathan Barés
<[hidden email]> wrote:

> Hi all,
>
> After googling for hours I still do not understand why my CanoScan 9000F
> MarkII is not recognized by my Lubuntu computer (14.04 kernel) and am hoping
> some of you could help with this.
>
> When I run sane-find-scanner I get:
>
>   # sane-find-scanner will now attempt to detect your scanner. If the
>   # result is different from what you expected, first make sure your
>   # scanner is powered up and properly connected to your computer.
>
>   # No SCSI scanners found. If you expected something different, make sure
> that
>   # you have loaded a kernel SCSI driver for your SCSI adapter.
>
>   # No USB scanners found. If you expected something different, make sure
> that
>   # you have loaded a kernel driver for your USB host controller and have
> setup
>   # the USB system correctly. See man sane-usb for details.
>   # SANE has been built without libusb support. This may be a reason
>   # for not detecting USB scanners. Read README for more details.
>
>   # Not checking for parallel port scanners.
>
>   # Most Scanners connected to the parallel port or other proprietary ports
>   # can't be detected by this program.
>
>   # You may want to run this program as root to find all devices. Once you
>   # found the scanner devices, be sure to adjust access permissions as
>   # necessary.
>
> I have tried to add the rule:
> # Canon CanoScan 9000F Mark II
> ATTR{idVendor}=="04a9", ATTR{idProduct}=="190d", MODE="0664",
> GROUP="scaner", ENV{libsane_matched}="yes
> in /etc/udev/rules.d/50-CanonScan.rules but still get the same problem.
>
> I am really surprised because the scanner seems to be seen by the computer
> when I run lsusb:
> Bus 002 Device 002: ID 04a9:190d Canon, Inc. CanoScan 9000F Mark II
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 003: ID 1c4f:0048 SiGma Micro
> Bus 003 Device 002: ID 413c:2107 Dell Computer Corp.
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>
> Here is also my version of sane:
> xsane-0.998 (c) 1998-2010 Oliver Rauch
>   Courrier électronique : [hidden email]
>   paquet xsane-0.996
>   compilé avec GTK-2.24.18
>   avec fonction de gestion de la couleur
>   avec support GIMP, compilé avec GIMP-2.8.4
>   Formats de sortie de XSane : jpeg, pdf(compr.), png, pnm, ps(compr.),
> tiff, txt
>
> If anybody has an idea of what is happening I would be extremelly happy to
> have some help.
> I thank you in advance.
> Best,
> Jonathan
>
>
>
>
>
>
>
> --
> sane-standard mailing list: [hidden email]
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-standard
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to  [hidden email]



--
"well, I stand up next to a mountain- and I chop it down with the edge
of my hand"

--
sane-standard mailing list: [hidden email]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-standard
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to  [hidden email]
Loading...